Mikado Logo 600 Specifications download pdf (Page 15)

BEC oder

Lipo-Empfängerakku

(1300-1500 mAh)

You are required to

use the adapter wire

for the connection

between the YGE-

ESC and the VBar

unit.

YGE ESC:

The YGE 160 provided in this combo is a special version

ESC which is already programmed. It will function exclusively

in combination with the governor function of VBar. For

programming the governor function, please follow the steps in

the VBar software shown in the two screen shots below. Should

you intend to use the YGE 160 with any other application,

it is necessary that it is re-programmed. Information on re-

programming can be obtained from YGE (www.YGE.de). More

information on the VBar Governor function can be obtained on

www.vstabi.info.

VBar:

The VBar provided here contains the 5.3 PRO Software.

For programming the VBar for LOGO 700 XXtreme, please

use the setup wizard.

BEC/receiver battery:

We highly recommend using a BEC that can provide two power

leads to the Receiver/RC Components.

Wiring:

Please note: With a carbon frame like the one in this LOGO

700 XXtreme, all wires must be placed in such a way that they

cannot be damaged by any sharp edges during operation of

the helicopter. Please apply the fabric tube and the edge guard

provided in this kit. Both types of protection are also available

individually from Mikado.

orange

brown

(!) This needs to be changed to

match the THROTTLE channel of

YOUR radio.

(!) Enter the maximum headspeed

you are going to y here, 2100 is

recomended for the XXtreme.

Page 15

12 Wiring RC Components

Prog Card

Receiver

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 24 25

Comments to this Manuals

No comments

Mikado Logo 600 Specifications Page 15

Comments to this Manuals

Related products and manuals for Toys & accessories Mikado Logo 600